Big Boobs

Archive for the 'Foot spa-E849' Category

E849

三月 29th, 2007 * Comment(0)


Blue style

Detox spa,ion-cleanse,detox foot spa machines ,anion foot spa purifier, Ion spa purifier, Foot spa cleanse, Ion spa cleanser, detox foot spa, Foot spa,aqua detox
SPECIFICATION

1.New Model design
2. Added the function of “Far infrared rays”
3.LCD panel shows time+ working voltage + ion strength + 5.Two kinds of inner packing:
    (1) one is ordinarily paper box
    (2) the other is aluminum box
*Please note your wanted inner packing when you place the order with us*
4.Equipped with auto-electric disconnection
5. Strong package of aluminum box
(1).A switch in back of machine is to adjust 110 voltage or 240 voltage
(2).VOLTAGE: 110V/240V     POWER: 15W     AMPERE: 0.1A    AC FREQ: 50/60HZ

Size
Net weight: 4KG
Gross weight: 5KG
The size of outside package: 38*32*23cm
Whole set includes
1. One unit X 1
2. Array X 1
3. Wrist belt of static electricity X 1
4. Power line X1
5. Belt of far infrared rays X1
6. Operating Manual X 1
7.Inner packing: aluminum box or ordinarily paper box

Operating manual:
(1).Put the power line, the function electrode and the wrist belt into the right holes in the main machine before use, then put the function electrode into water and put in the wrist belt.      Connect the power.
(2).Press “ON” of power, the display as follows:
                        

Enter Time 10-30
Time=30  Ver4.0

 Press the （↑）, and （↓）to choose the time of detoxification, usually set30 minutes original. Press the END button to enter the detoxification period after input the detoxification time, the display of the detoxification operating as follows:
                          

Time=08:26  pos+
T=30  M=3  E=2.0

“Time=08:26” is the time of the detoxification, “pos+” is the polarity of the ions detoxifying, “pos+” is the anode, Neg- is the cathode, “T=30” is the set time, “M=3” is the 3rd mode of working, “E=2.0” is the energy of detoxifying. The machine will stop and this detoxification is finished when the time is up. (Duo to the different water in different area, the detoxification energy can not to get the set numerical value at the beginning, at this condition you should add some salt so that the detoxification energy can get to the set numerical value. You should add some water when E=0.3 at the beginning, so that the E of the detoxification energy numerical value will become 2.0, namely E=2.0. )
(3). When the ionic spa footbath working, it can work under these modes:1,2,3 and the energy numerical value during 16,18,20. The ionic spa footbath will acquiesce the 3rd mode when it beginning. The user chooses the different modes according to the “MODE”. It will be stop when press the ESC during the ionic spa footbath working. The detoxification working in the corresponding energy numerical value when choose a mode.

The solutions for usual questions:
I.there are no vision in the display after turn on.
(1)Check the electrical outlet weather less crowded or the safety wire weather melted.
(2). Check the hole weather less crowded between the line of display and the electrocircuit board.
II.  there is appearing “Circuit Error”.
   1). Check the wrist belt patches weather contact with skin.
   2). Check the wrist belt weather contact with the main machine firmly.
   3). Open the box, check the hole weather less crowded between the line of the wrist belt and the electrocircuit board.