|
Detox spa,ion-cleanse,detox foot spa machines ,anion foot spa purifier, Ion spa purifier, Foot spa cleanse, Ion spa cleanser, detox foot spa, Foot spa,aqua detox
|
| SPECIFICATION |
|
1.Streamline shape, LCD panel shows time, working voltage + ion strength + 6 working modes.
2. Customers can purchase extra
Function of measuring blood pressures.
3. If you add too much salt, the alarm will function.
4.Metal outer + hand-hold reaction bat;
5. This type can be used continually.
6. Adaptor set inside machine.
|
SIZE:
Item Measurement: 33*22*19cm
Package Carton Size: 40*38*30cm
Weight: G.W: 7.5kg / N.W: 6kg
Packaging: Carton |
| Whole set includes |
1.control unit
2.adaptor
3.array
4.safety wire
5.hand-hold reaction bat
6.Blood manometer(extra purchase)
7.Operation Manual |
|
Operation steps
1.Check the voltage to see whether it is right(220V/50Hz) and connect the main power line.
2.Prepare for some warm water which is in 40~50 degree with a wooden basin or plastic basin.
3.Place the instrument flatly on the dry wooden bench and connect it with the floor less than 10cm.
4. Place the ion generator into the instrument output socket. Then put one side of the telepathy line into the hand stick output socket and the other side into the hand stick.
5.Press the button of the main power and select the working pattern. Then press the START button, meanwhile light the LCD shows in the second minute.
6.Hold the hand-stick and put the feet into the water. (Soak the feet)
7.The instrument works at this moment, and the LCD shows displays the voltage is UXX.X. after 10 seconds shows AX.XX.10 seconds later you should see whether AX.XX reaches above 1.50. Or it needs to put some salt into the water to add its conductivity. And make sure that it is not over2.8, or the instrument will be in the state of self-protection and stop, showing[ E—]
8. When the instrument is in the state of self-protection ans shows [E—], please put more warm clean water in order to dilute the concentration of the water. The machine won’t work until the AX.XX is less than 2.8.
9. Generally the working can’t be over 30 minutes. The longest time is not more than 45 minutes.
10.After finishing the operation, please wash the ion generator with plenty of water and dry in order to prolong its life span, which can be used for about 30~50 times.
 |
Comment(0)